Mark Andy 2014, P7 13”, 2, Color with Digital 4 color Capabilities:

2 Flexo Stations with a GEW UV and Chill Rolls, Hot Air Drying, DIGITAL 4 color UV based Ink Jet Printing with GEW UV, QCDC (Quick Change Die Station), Single Waste Rewind, Single Product Rewind, Laminator, Corona Treater, Web Cleaner,  AVT Visual Quality Check System, Crush cut Slitting, Roll Lift, Cantilever Unwind. Press Speed (Mechanical) 900 FPM, With the digital module engaged, the speed is reduced to 240 ft/min. Min speed is 50 ft/min. Optimum speed is above 150 when printing with digital.

Demo by Appointment.

Martin Butt Splicer 20” CECB520
500 FPM
3” cores with 6” and 12” Adapters
60” Roll Diameters

( Ran 75 gauge film, pressure-sensitive material to 18 point board. )

Mark Andy 830, 10" Web Width, 3" Pneumatic Cores, Available with or without 4th Station. Single Unwind, Dual Rewind, Lamination Tower, 2 Waste Take Ups, 2+1 Die Station. Operator Remote. Under 3K Meter Hours. Includes Bottom Stacker and aprox. 75 Assorted Print Cylinders

Main Volts: 230

Control Volts: 120

Single Phase

(1) 3" Unwind down to (2) 1" Rewinds, Manual Cores, 9" Web Width, Independent Pneumatic Regulated Tension, Electric Preset Footage Counter, Variable Speed Drive, Low and High Speed Slitting. Razor Blade Slitting, Adjustable Slitting Increments.

Machine Width: 26"

Machine Length: 24"

Machine  Height: 36"

Machine  Weight: 250lbs

Max Undwind Dia.: 14"

Max Rewind Dia.: 14"

Press & Print Width: 13 inch (330 mm) max web width, 7 inch (178 mm) min web width

(4.5 inch (114 mm) min web width roll-to-roll), 12.5 inch (318 mm) digital print width

13 inch (330 mm) flexographic print width

Substrates: Pressure sensitive stock (paper, BOPP,PET, PP), unsupported paper, tag stocks; no priming required

Thickness: 60 - 250 micron, .0023 inch (.06 mm) min, .010 inch (.25 mm) max

Digital Image Resolution:1200 x 1200 dpi native

Flexo Repeat Range:7 - 18 inch (178 - 457 mm) / 47 inch (1195 mm) banner mode

Die Repeat: 8.5 inch (216 mm) min / 18 inch (457 mm) max

Printing Speed: 44 fpm (13.5 mpm), 62 fpm (18.9 mpm)

Digital Front End & RIP: Print driver accepts pdf files from your in-house or external pre-press operation

Color Management: 4 color process CMYK, hybrid spot with in-line flexo

Curing & Drying: Air cooled UV LED

Unwind Capacity: 30 inch (762 mm), core size: 3 inch (76 mm)

Rewind Capacity: Dual, max 16 inch (406 mm), Single, max 18 inch (457), core size: 3 inch (76 mm)

Control Software: Proprietary

Die Tooling Compatibility: Mark Andy and most other rotary die tooling with purchased adapters

Installation Footprint: W x D x H: 140 x 40 x 60 inch / (3,556 x 1,016 x 1,524 mm)

Environment: Power: 220 volts, 50/60 Hz, 90 amps, single phase, Temperature: min 50F (10c) - max 86F (30c)
Optimum Temperature: 64F (18c) - 74F (23c), Relative Humidity: min 10% - max 80%, Optimum Humidity: 40% - 60%

Arpeco Tracker Rewinder, 13" Width, 3" Pneumatic Cores, Auto Stop, Roll End, Edge Guide, Length and Label Count.

Rotoflex VSI 330, 1998 Model Year, 13" Web Width, Shear Cut Slitting, Strobe Light, Edge Guide. One Owner, In Good Condition.

Rotoflex VLI Slitter Rewinder, 10" Width, Shear Cut Slitting, Edge Guide, 1994 Model Year.

Pwr Req: 110/220V, 38 Amps