1658 Morrow St. Green Bay, WI 54302
  • Category

Added to Quote

No products in the list

Hide Out of Stock
SOLD
Stanford 142HD Rewinder #1606
[embed]https://youtu.be/LE4sxtohyOY[/embed]
SOLD
B-Bunch Fan Folder #1764 SOLD

B Bunch Model 100,  Series 500, Model Year 2007 Includes Drive Arm to Connect The B-Bunch to the Gear on the Sheeter Anvil. Following Gear Sizes are Included: 63, 64, 65, 77, 84, 85, 87, 96, 97, 98, 99, 128 Folder was installed on a Mark Andy 2200 13”

SOLD
ADSI Digital Finisher #1667 (Sale Pending)
[embed]https://youtu.be/sA6ajVd1rVY[/embed]
SOLD
Arsoma EM280 #1626
[embed]https://youtu.be/0u21RKH_kXo[/embed]
SOLD
Comco ProGlide #1724

Comco ProGlide, 2002 Model Year, 8 Print Stations, 13" Web Width, 1/8 CP Gearing Features Include: Sheeter, Stacker, Web Guide, Auto Register.

SOLD
Mark Andy 10" Print Station Item #1303

Mark Andy 10" Print Station, Like New Condition, Refurbished 2 Years ago and very Lightly Used. 1/8 Gearing.

SOLD
Arpeco Tracker 13" #1708 SOLD
[embed]https://youtu.be/oop6mVJ-Iik[/embed]
SOLD
Mark Andy DS-1000 Dryer - Item #1516

2006 Mark Andy DS-1000 Dryer Pack, 240 volt 3 phase.

SOLD
Mark Andy 830 Turn Bar + Dryer Hood Item #1506

Mark Andy 830 Turnbar with Hot Air Drying Package.

SOLD
CTC ST-300 Turret #1716

CTC Turret, 16”, Model ST-300, 1997, Core Glue, Tail Glue, (6) 3” Rewind Core Holders. Fully Functional When Last Taken Out of Production.

SOLD
JM Heaford Cobra Plate Mounter 18" Item #1540
[embed]https://youtu.be/gAWYy4UIoNk[/embed]
SOLD
Gearless B Bunch Off Line Fan Folder #1740 SOLD
[embed]https://youtu.be/ZRmjQiuEU7A[/embed]
SOLD
Nilpeter 10in Cold Foil Rewind #1757 SOLD
[embed]https://youtu.be/2BCyc4mfQTg[/embed]
SOLD
Aquaflex DBX 1002 #1610

Aquaflex DBX, 10" Width, 2 Print Stations, 2 Die Stations, 1999 Model Year. Includes Stacker Does NOT Include Servo Unit Shown in Pictures.

SOLD
Doyle Web Vacuum System #1642 SOLD

3 Vacuum Head Doyle Web Cleaning System. 13" Brushes

SOLD
Allied Gear FlexoMaster 1B 7" Item #1483 Sold
[embed]https://youtu.be/d3EHUpSyECs[/embed]
SOLD
KTI Turret Rewinder #1686 SOLD
[embed]https://youtu.be/Ik3WsEUGqI8[/embed]
SOLD
Primera FX1200 and CX1200 Digital Press Item #1687
[embed]https://youtu.be/OveUdEAzMj0[/embed] [embed]https://youtu.be/QT15lpDCYvA[/embed]
SOLD
Arpeco Tracker 13" #1582 SOLD
[embed]https://youtu.be/3PHlN2I195c[/embed]
SOLD
Tilt-Lock Roll Turner #1654
[embed]https://youtu.be/sNtTjUEZQuk[/embed]
SOLD
ABG Omega 13" Slitter Rewinder #1735 SOLD
[embed]https://youtu.be/QKWeCBSg9ys[/embed]
SOLD
7" Punch Unit Item #1088

7" Punch Unit, Set up with Vacuum, Includes Hoses.

SOLD
Arpeco Impressionist 17" Item #1485

17" Arpeco Impressionist, 1990 Model Year, Very good condition, 8 UV print stations, Automatic unwind roll lift large diameter unwind with De-curling, 2 waste rewinds 2 product rewinds, 3 rotary die stations, The press has  a reciprocating platen die-cutter and scrap handling system included, Laminating, Turn-bar, Delam/relam Approx. 75 print cylinders and 7 anilox rolls […]

SOLD
Comco Print Cylinders 7" Item #1120

107 Total Cylinders (List Available)

SOLD
Mark Andy PM160 #1725

Mark Andy PM160 Plate Mounter. 16" Width. Digital Flat Screen.

SOLD
Web Techniques 7" Rewind Table #1645 SOLD
[embed]https://youtu.be/bOQ6F9zoqos[/embed]
SOLD
HyTech / Goldline Stacker Item #1035

HyTech / Goldline Stacker - 10" for a Nilpeter FA 2400 in NEW Condition

SOLD
Webtron 650 - 9 Color #1709
[embed]https://youtu.be/sMwmDYH4psE[/embed] [embed]https://youtu.be/fsHieKpN2eY[/embed]
SOLD
CTC Turret Only #1631
[embed]https://youtu.be/32zkaSP9s9Q[/embed]
SOLD
Stork 16" Rotary Screen Unit #1727

Stork Rotary Screen Unit 16” Completely rebuilt and never put back into production.   2 Units Available

SOLD
Kompac EZ Koat 15" Item #1260

Kompac EZ Koat Web 15, 15" Width, 17" Arc UV for 15" Web, 1 Product Rewind.

SOLD
MATHO Trim Removal System #1691

Portable, Cart Mounted, MATHO Waste Chopper System.   120V.

SOLD
Webtron 750 HQV 8 Color Item #1439

Webtron 750 HQV, 1997, 8 Color, 1/8th gearing, 3 Die Stations. 1 Sheeting Station, Product Rewind, 2 Waste Rewind, Laminator, Roll Lift, Upgraded Tension System, No UV, No Cylinders or Dies.

SOLD
Konica C71CF Digital Press Item #1500

Konica Minolta bizhub Press C71cf - 4 Color, is ideal for label converters who are looking to shift volumes from conventional presses to digital – due to the reduction of print run lengths, request for faster delivery times, personalisation and versioning as well as production of on-demand runs. The bizhub PRESS C71cf offers outstanding productivity, brilliant image quality […]

SOLD
Aztech Laminator 13" Item #1090

Aztech 13" Lamination Unit, Never Used.

SOLD
Gallus Arsoma EM 2800 #1664
[embed]https://youtu.be/PGV7WdGSqRQ[/embed]
SOLD
Mark Andy 2200 10” Stacker Item #1535

Mark Andy 2200 10” Stacker / Conveyor with Self Driven Motor Includes Mounting Arm

SOLD
Mark Andy 2 Color Press Module Item #1078

Mark Andy 2200, 10" Dual Print Stations. Fits only with an H Series Press. In Very Good Condition. Includes Rollers and Trays for Both Stations

SOLD
Mark Andy 2200 7" #1650 Sale Pending
[embed]https://youtu.be/KVWndrS76to[/embed]
SOLD
Mark Andy 4120 16" / 0 Color #1720
[embed]https://youtu.be/j2cZlpskvfE[/embed]
SOLD
Mark Andy Dryer Pack Item #1522

Mark Andy Model 82 Dryer Pack 480 V In Good Working Order

SOLD
PM160 16" Plate Mounter #1703 SOLD

Mark Andy PM160 Plate Mounter, 16" Width Digital Flat Screen Display.

SOLD
Mark Andy SRL-4 Digital Press Item #1399

Mark Andy SRL-4 Digital Press w/ Proactive RIP Server and Harlequin RIP w/ High Capacity Toner Cartridges

SOLD
Mark Andy 910 Item #1555

Mark Andy 910 10” Web Width, 4 Colors, 2 die Stations, 1 Sheeting Station Add on Coast Control Edge Guide Tension System

SOLD
Webtron 750 8 Color Item #1559

Webtron 750, 8 Colors, 1998 Model Year, UV on Final Station, Press Includes a Turn Bar, Stacker, 10+ Anilox, 280 Print Cylinders

SOLD
Comco Captain 10" 4 Color Item #1546

Comco Captain 4 Color 10", Turn Bar,  2 Die Stations, 2 Waste Rewind, Product Rewind, 1 Sheeting Station, Print Cylinders.

SOLD
Mark Andy XP5000 9 Color Item #1571

MARK ANDY 5000-13A, 2006 MODEL YEAR, SERVO ROLL UNWIND 40", CORONA TREATER, TEKNEK WEB CLEANER, 9 PRINT STATIONS, HOT AIR AND UV CURING ON ALL PRINT STATIONS, 12 PRINT CASSETTES , 10 DOCTOR BLADE HOLDER, 19 HARPER ANILOXES  , 4 QUICK CHANGE CARTS 1 ROTARY SCREEN PRINT UNIT (STORK), 1 GRAYMILLS INK PUMP (FOR ROTARY SCREEN […]

SOLD
Omet VF530-F1 Item #1573

10 Print Stations, 21" Max Web Width, 660 FPM, 12"- 33" Print Repeat, 16"-24" Die Cut Repeat, 1/2 Mil Films - 24pt Carton Substrate Thickness, Enercon Corona Treater, Edge Guide, GEW E-Brick UV's, Telstar Lam Unit, E+L Inspection System, Web Cleaner, Infeed Tension System, Chiller Unit w/ Chill Drum Dual Position Rewinder. Power Req: 480V, […]

SOLD
SOHN 500 Slitter Rewinder & Inspection Machine #1594

(1) 3" Unwind down to (2) 1" Rewinds, Manual Cores, 9" Web Width, Independent Pneumatic Regulated Tension, Electric Preset Footage Counter, Variable Speed Drive, Low and High Speed Slitting. Razor Blade Slitting, Adjustable Slitting Increments. Machine Width: 26" Machine Length: 24" Machine  Height: 36" Machine  Weight: 250lbs Max Undwind Dia.: 14" Max Rewind Dia.: 14"

SOLD
RotoPress 3150 #1602

Press has about 2,500 good working condition motor was just rebuilt 10", 1/8" Gearing, Automatic Throws / Constant Turn Anilox Rolls, 8 Quick Change Anilox Assemblies, Dr. Blade Assemblies, 2 Product Rewinds, 2 Waste Rewinds, 1 Unwind, 40" Unwind Diameter, 3 Die Stations, 4 Removable Base Rolls, 1 Sheeting Station, 1 Laminator, 1 Electronic Edge […]

SOLD
Aztech Slitter Die-Cutter #1630
[embed]https://youtu.be/VJmfh-7vvB4[/embed]
SOLD
Mark Andy 4120 16" #1699

Mark Andy 4120: 16" Web Width, 3 Print Stations, 2 Product Rewinds, 1 Waste Rewind, Lam Tower, Edge Guide. Dryer Pack. Tension System Upgraded, Very Clean Press

SOLD
Allen Datagraph DFS-1000 Item #1400

Allen Datagraph DFS-1000, 2014 Digital Finishing System.

SOLD
I-Tech Talon DLS Printer And Label Finisher Item #1558

Allen Datagraph I-Tech Talon DLS Printer and Label Finisher. In Great Condition Countour Cutting Full HPGL vector cutting compatible with SMARTMark opto-electrical line sensor Speed: Up to 10 feet/min | 3 meters/min Web Width: 4 - 8.5 inches | 10 - 21.5 cm Max Frame Length: 14 inches | 35.5 cm Max Input Roll Diameter: […]

SOLD
Primera CX1200 Printer and Finisher #1662
[embed]https://youtu.be/ZoRgUy20DWw[/embed]
SOLD
Brotech 13” Digital Finisher #1695 SOLD

Brotech 13” Digital Finisher: 2016 Model Year 1 Print Station UV and Hot Air 1 Die Station Semi Rotary 19” and 22” Mag Cylinder Reregistration 2 Product Rewinds 1 Waste Rewind Corona Treater Razor and Shear Slitting RD Scorer

SOLD
Gallus T 250 #1604 SOLD

1998, Width: 10", 1 Dr. Blade Assembly, 2 Product Rewinds, 36" Rewind Diameter, 1 Waste Rewind, 1 Unwind, 42" Unwind Diameter, 1 Die Station, 1 Laminator, 1 Electronic Edge Guide, 7 400-WPI Single-Lamp UV Units, Web Cleaning System, Cold Foil Stamping, Hot Foil Stamping, 1 Ceramic Anilox Roll, Can see in Operation. , Variable offset […]

SOLD
Mark Andy 2200 G Series 2 Color Module 13" - Item #1515

2 Mark Andy 13" G- Series Print Stations. Anilox Not Included

SOLD
B-Bunch 590 Fan Folder Item #1292

B-Bunch 590 Fan Folder, Fits up to 20" Web, Mid 90's Model Year, Attached Counter, No Gears Available.

SOLD
Comco Cadet #1611 SOLD
[embed]https://youtu.be/VqorXe9HzTs[/embed]
SOLD
Mark Andy 2100 7" 6 Color Press Item #1389

Mark Andy 2100, 6 Colors, 7" Width, 3 Die Stations. 1 Sheeting Station, 2 Product and 2 Waste Rewinds, Single UVT UV, Stacker, Fife Edge Guide, Turn Bar, 1/8th Gearing, Press will Include Roughly 100 Print Cylinders (No List)

SOLD
Aztech 10" Sidewinder Item #1486

Aztech Slitter Rewinder, Model Year 1994, Model SR3010, 10” Dual Rewind, Shear Cut Slitting, Accuweb Edge guide, Strobe, 6’ Core Adaptor (1), Counter, Single Phase 115 V. 15 Amp.

SOLD
DT 3010 Unwind Station #1670

DT 3010 Unwind Station Supports 30" Dia. x 10" Wide Rolls

SOLD
Telsar 10” Unwind & Rewind for Hot / Cold Foiling #1679
[embed]https://youtu.be/i7SjD6md1AQ[/embed]
SOLD
Webtron Stacker #1656

Webtron Stacker for a 650 or 750 Press

SOLD
Allied Gear 313 #1600

Allied Gear Model 313, 1996, Width: 13", Meter hours: 9264, 1/8" CP Gearing, Automatic Throws / Constant Turn Anilox Rolls, 4 Dr. Blade Assemblies, 2 Product Rewinds, 40" Rewind Diameter, 2 Waste Rewinds, 1 Unwind, 40" Unwind Diameter, 3 Die Stations, 3 Removable Base Rolls, 1 Sheeting Station, 1 Laminator, 1 Electronic Edge Guide, 1 […]

SOLD
Propheteer 700 Press Item #1263

Propheteer 700, 1 Color, 7" Width, 1/8" Gearing, 3+1 Die Stations, Lam Tower, Crush Cut Slitting, Edge Guide, Constant Turn Anilox. Only 2377 Meter Hours

SOLD
Arpeco Tracker 16" #1621

16" Arpeco Tracker, Length Count, Roll Lift, Pneumatic Unwind and Rewind, 1" and 3" Core Holders and Web clamps.

SOLD
Mark Andy 4120 10" #1618
[embed]https://youtu.be/9c3oJoUjq5M[/embed]
SOLD
Mark Andy 800 Series Anilox Rolls Item #1099

Mark Andy 800 Series Anilox Rolls, 7" , Mostly New in Box, Some Used but all in Great Condition.

SOLD
Propheteer 1000 Item #1167

Propheteer 1000 - 10", 6 Colors with Corona Treater, 4 Lightouch UV's, 4 Die Stations, 1 Sheeting Station with Conveyor, Turnbar, All Stations have Hot Air Drying. Coming with Some Anilox and Print Cylinders. (This Press Needs a New Control Board) Can Give Pricing on a New Board if Interested.

SOLD
Propheteer 1000 Press Item #1075

Propheteer 2  Color (One Forward & One Reverse) - 10" Web Width, Quick Change Anilox & Meter Rolls, Pneumatic Lift-Off, Constant Turn Anilox, 6"-15" Repeat, 3 Stage Dryer Control, Pull Roll & Slitting Station with 3" Air Operated Core & Tension Control, Electronic Edge Guide, Metered Infeed Pacing System & Pneumatic Roll Lift, Running Register, […]

SOLD
Arpeco Tracker 13" #1666

Arpeco Tracker: Fife Edge Guide, Matrix Missing Label Detection System, Length and Label Counts, Unilux Strobe Light, 3" Core Shafts, Roll Lift, Extended Splice Table. Max Unwind: 28" Max Rewind: 18"

SOLD
Mark Andy LP3000 Item #1457
[embed]https://youtu.be/HpRjyctk4z8[/embed]
SOLD
Arpeco Premier 16" #1668
[embed]https://youtu.be/b5jgtLF9Jdo[/embed]
SOLD
Rotary Combo Platemaker Item #1041

Rotary Combo Platemaker, 24"x 30" Width, In Good Condition.

SOLD
Brotech FS330 #1660
[embed]https://youtu.be/QhQrVNb8IF8[/embed]
SOLD
Mark Andy 4200 10" #1616

Mark Andy 4200, 10",  7 colors, 4 Die Stations with 2 Removable Base Rolls, 1 Sheeting Station, 2 Product Rewinds, 2 Waste Rewinds, Laminator, Dr. Blades,  Hot Air Drying, 1 UV on Final Station, Conveyor, Turn Bar, Video Inspection, Web guide, Includes 7 Anilox Rolls and 7 Dr Rolls, and 14 Ink Pans.

SOLD
Mark Andy Model 82 Dryer - Item #1513

Mark Andy Model 82 Dryer: Rebuilt with New Drive and Wiring, Soft Start, Direct Drive Motors. Power: 230V, 3 Phase, 33 FLA

SOLD
Mark Andy P7 #1607
[embed]https://youtu.be/1woVe813llQ[/embed]
SOLD
Nyloprint Platemaker 96 X 120 Item #1505

Glunz & Jensen Nyloprint Platemaker Model 96X120E, 2016 Age, 36" x 48"

SOLD
SOHN Slitter Rewinder & Inspection Machine #1593

(1) 3" Unwind down to (2) 1" Rewinds, Manual Cores, 9" Web Width, Independent Pneumatic Regulated Tension, Electric Preset Footage Counter, Variable Speed Drive, Low and High Speed Slitting. Razor Blade Slitting, Adjustable Slitting Increments. Machine Width: 26" Machine Length: 24" Machine  Height: 36" Machine  Weight: 250lbs Max Undwind Dia.: 14" Max Rewind Dia.: 14" […]

SOLD
JM Heaford Cobra 27” Video Plate Mounter Item #1539
[embed]https://youtu.be/gAWYy4UIoNk[/embed]
SOLD
Degraff Concept 201C Photopolymer Plate Maker Item #1454

Degraff Concept 201c Photopolymer Plate Maker (2009) One piece unit with exposure, washout, dryer and finisher. Includes solvent 

SOLD
Kelleigh 310 Plate Maker Item #1489

Kelleigh 310 Plate Maker, 2009 Model Year, 5,184 Running Hours, 24"x 30" Plates,

SOLD
Kelleigh 310 Plate Maker - Item #1519

Maximum plate size 24’’ x 30’’  Plate gauge 0.045’’ to 0.250’’ Dimensions (overall length x depth x height) 85’’ x 44’’ x 48’’ Electrical Supply: 220 v 3 phase (+10% -5%) 60 Hz Power: 25A, 4 wire with ground Air: 90 psi @ 7 CFM Dry filtered 1/4” NPT Exhaust Out: 6’’ vent 550 CFM […]

SOLD
Mark Andy 2200 7" Cylinders Item #1385

Cylinders (Approximately 100) for the 2200 7” for sale T/Q 48-5 50-1 52-3 54-1 55-3 56-1 57-1 59-4 61-3 62-1 63-1 64-2 65-1 66-1 67-1 68-2 79-2 83-2 84-1 85-2 87-2 88-4 89-2 91-1 97-2 99-3 100-2 102-4 104-4 105-2 106-4 108-4 110-4 11-4 112-4 114-3 114-4 118-4 125-4 132-2 138-3 140-5

SOLD
B Bunch 1000 20" Item #1427

B-Bunch Model 1000, 20" Width, 1000 FPM, Folds 7" to 14" Length, 3.5" to 20" Web Width. Extra Gear Sizes: 105, 51, 44, 42

SOLD
Rotoflex VLI 10" Item #1562

Rotoflex VLI Slitter Rewinder, 10" Width, Shear Cut Slitting, Edge Guide, 1994 Model Year. Pwr Req: 110/220V, 38 Amps

SOLD
Mark Andy 2200 10" / 10C Item #1561

Mark Andy 2200, 10" Web Width, 10 Colors, 1/8 CP & 32 DP Gearing, UV on Final Station, Score Slitting, Edge Guide, Video Inspection System. PWR REQ: 208V, 3 PH, 60 Htz

SOLD
Rotoflex VSI 400 #1619

Rotoflex VSI 400, 16" Web Width. 40" Unwind Dia./  25" Rewind Dia. 208/230 Voltage

SOLD
Schober RSM 520 20" Offline Die Cutter #1627
[embed]https://youtu.be/ACOF8EwZWAY[/embed]
SOLD
Comco Captain 10" 2 Color Item #1544

Comco Captain 2 Color 10", Turn Bar,  ***4 Die Stations***, 2 Waste Rewind, Product Rewind, 1 Sheeting Station, Print Cylinders.  Stacker

SOLD
Comco Captain 10" 5 Color Item #1545

Comco Captain 5 Color 10", Turn Bar, UV System on Final Print Station, 3 Die Stations, 2 Waste Rewind, Product Rewind, 1 Sheeting Station, Print Cylinders.

SOLD
Webtron 750 Die Cutter Item #1580

Webtron 750 9+1 Die Station Press,  7.5" Web Width, 4 Lam Towers, Edge Guide, Stacker, 2 Product Rewinds, 2 Waste Rewinds, 1995 Model Year. 1/8 63T Gearing. Power Req: 230V, 3 Phase, 75 Amps, 60hz

SOLD
Mark Andy Digital One #1595

Press & Print Width: 13 inch (330 mm) max web width, 7 inch (178 mm) min web width (4.5 inch (114 mm) min web width roll-to-roll), 12.5 inch (318 mm) digital print width 13 inch (330 mm) flexographic print width Substrates: Pressure sensitive stock (paper, BOPP,PET, PP), unsupported paper, tag stocks; no priming required Thickness: […]

SOLD
Allied FM3 10" 4 Color Item #1579 SOLD

Allied FM3 , 10" Width, 4 Colors,  Edge Gide, 30“ Unwind, 3 Die Stations +1 Sheet Stations, 20” Product Rewinds, 24“ Waste Rewinds, Lam Station, 6 Air Chucks, Doctor Blades, 3 DIP Disposable ink trays, 4 Removable Base Rolls, 2 Flood Coat Print Cylinders 64 gear, Razor Slitting Unit, Stacker, 7” Die Adapter, Under Score […]

SOLD
Arpeco Premier 16" #1620

Arpeco Premier, 16" Web Width, 2002 Model Year, Roll Lift. Max 40" Unwind Dia. / Max 25" Rewind Dia.

SOLD
PIC Rewinder 10" #1635
[embed]https://youtu.be/uVzOwm4C8qo[/embed]
SOLD
Karlville K-1 Seamer Item #1431 SOLD

Karlville K-1 Seamer, 2011 Model Seam-200 300 Fpm, Approx. 2’’ to 7. 75” Lay Flat Production, Material Width 16.5”,  Pneumatic Knifes, 3” Cores. (Spec Sheet Available)

SOLD
Mark Andy 4120 16" #1617

Mark Andy 4120 16" 6 colors, with UV on final station, Hot Air Drying, Dr. Blades, 5 Die Stations, 2 Removable Base Rolls, 2 Waste Rewinds, 2 Product Rewinds, Roll Lift Edge Guide, Video Inspection, Turn Bar, Stacker, 16 Anilox Rolls, 16 Dr. Rolls,  

SOLD
Mark Andy 910 Item #1537

Mark Andy 910: 10" Width, 4 Colors, 2 Die Stations + 1 Sheeting Station, Lam Tower, 2 Product Rewinds, 1 Waste Rewind, Edge Guide, 1 Dr. Blade Station, 4 Ceramic Anilox, 7" Die Adapter. 120+ Assorted Print Cylinders will be Included. (No List available)

SOLD
CEI Model 130 #1637
[embed]https://youtu.be/hPumRHFxSOc[/embed]
SOLD
Webtron 650 4 Color Press Item #1354 (Off the Market)

Webtron 650, 4 Colors, 6.5" Web Width, Slitting, Edge Guide, Laminating Tower, 3 Die Stations, 1 Sheeting Station, 2 Waste Rewinds, 4 Removable Base Rolls. In Good Condition

SOLD
Konica Digital Label Printer #1624

Konica C71Cf, 2016 Model Year, 13" Web Width, 4 Color. 23.5" Max Unwind and Rewind Diameters

SOLD
Mark Andy 910 Item #1554

Mark Andy 910:  10” Web Width, 4 Colors, 2 die Stations, 1 Sheeting Station Add on Coast Control Edge Guide Tension System

SOLD
Doyle Vacuum Web Cleaner Item #1328

Doyle Vacuum Web Cleaner, Good Working Condition, Was Used on a 16" Comco. Power:  230/460 VAC

SOLD
Web Techniques Rewind Table #1629
[embed]https://www.youtube.com/watch?v=vc8a3unJ6x0[/embed]
SOLD
Kidder 660 Item #1102

Kidder 660, 4 Colors, 40" Width, 1 Perf- Unit, Rewind Turret, 1/4 Gearing, Roll Lift, Laminating, Dr. Blades, Ceramic Anilox, Web Guide, 3 UV Stations, 1 Water Based Station, UV Drying. Was Used to Laminate 1.5 Mil Film.

SOLD
2013 Mark Andy P3 17" 8 Color Item #1437

Mark Andy P3 (17 inch) (2013), 40” Unwind, Roll Lift, Ultrasonic Edge Guide wit 2 sensors, 8 Colors, Standard Dr. Blades, Hot Air Drying, 2 die Stations, 1 Sheeting Station, 1 Waste Rewind, Lateral Web shift, Waste Rider Roll, BST Inspection System, 2 Product Rewinds 40”, Rail System from Station #1 to #4

SOLD
Rotoflex VSI 330 13" Item #1574
[embed]https://youtu.be/wyKTz3B_4qk[/embed]
SOLD
Rotoflex VSI 330 Item #1564

2004 Rotoflex VSI 330, 13" Width, Shear Slitting, Edge Guide. 230V, 20 Amps, 1 Phase

SOLD
Rotoflex VSI 330 13" Item #1563

Rotoflex VSI 330, 13" Width, Shear Cut Slitting, 2000 Model Year. Pwr Req: 230V, 18Amps

SOLD
Mark Andy 830 7" Item #1533

Mark Andy 7" with  3 Color. 2 Die Stations, 1 Sheeting Station, 1 Waste Rewind, 2 Product Rewinds, Large Roll Unwind with Roll Lift, LOW hours Turn Bar Available but not included from gb Flexo

SOLD
Mark Andy 2200 10" #1615

Mark Andy 2200 10", 6 Color, 2 Die Stations, 1 Sheeting Station, Hot Air Drying, UV on the Final, Dr Blades, Single Product Rewind, Single Waste Rewind, Roll Lift. Video Inspection System, Includes 6 Anilox and 6 Dr. Rolls.

SOLD
Mark Andy VPM 160 #1614 SOLD

Mark Andy VPM 160 #1614, Video Plate Mounter 16"

SOLD
Mark Andy XP5000 20" Listing #1504

Mark Andy XP5000 - with 20" Web Width, 2009, 9 Colors, 8 Stations are Flexo with UV on the 1st Station and 1 Station is Waterbase with UV, 1/8" Gearing, Corona Treater, Video Inspection, Advanced Closed Loop Auto-Registration and Tension Control. Able to Run Unsupported Film to Light Board Stock

SOLD
Mark Andy 910 Parts Item #1301

Mark Andy print station arms. Box if bearings and spare parts 2.   200 line Chrome Anilox Rolls 3.   Metering Rolls recovered 1.   Lower Base roll for die station new

SOLD
7" Comco Stacker Item #1110

7" Comco Stacker, 1990's Model Year, 1/8 Gearing, This Stacker is in Good condition.

SOLD
Doyle 16" Vacuum Web Cleaner Item #1329 Sale Pending

Vacuum Web Cleaner, Came Off 16" Flexo Press, Good Working Condition, Doyle Manufacturer Power:  230/460 VAC

SOLD
Allied Gear 500 16" 7 Color Item # 1552

Allied Gear 500 16": 1999 Model Year, 1/8th Gearing, 7 Colors UV Flexo/ IR Drying, 6 Die Stations, 28” Repeat, Laminator, 6 Rotary Screen Print Heads (Stork), Honle 400 W UV with 13 Lamp Heads, Hot Foil Stamping (Die Station), 40” Unwind, Stacker , Turn Bar 300 to 400 Print Cylinders Available Low Meter Hours

SOLD
Mark Andy 2200 10" / 10C Item #1572

MARK ANDY 2200-10G, ROLL UNWIND AND WEB CONTROL SYSTEM, TURN BAR , 10 PRINT STATIONS, HOT AIR BLOWERS ON ALL PRINT STATIONS 3 UV CURING (UVT), 10 PRINT CASSETTES + METERING ROLLS AND INK CHAMBERS, 10 DOCTOR BLADES, CRUSH KNIFE SLITTING, 20 ANILOXES 2 DIE STATIONS + WASTE REWIND, 1 SHEETER STATION + WASTE REWIND, DIE […]

SOLD
Mark Andy 2200 13" 8 Color Item #1570

Mark Andy 2200, 13" Web Width, 8 Colors, 6 UV Lamps (4 Functioning), Lam Tower, Web Guide, Score Slitting, 1/8 Gearing, In good Condition.

SOLD
Mark Andy 2200 7" / 6C Item #1566

Mark Andy 2200, 1998 Model Year, 7" Web Width, 6 Colors, 1/8 CP Gearing, 3 Die Stations + 1 Sheeting, 1 Product Rewind, 2 Waste Rewinds, STD Unwind w/ Roll Loader, Single UV, Lam Tower, Edge Guide, Video Inspection System.

SOLD
Mark Andy 2200 7" / 8C Item #1565

Mark Andy 2200, 7" Web Width, 8 Colors, 1/8CP Gearing, 1992 Model Year, 3 Die Stations + 1 Sheeting, 2 Product Rewinds, 2 Waste Rewinds, 1 UV, Lam Tower, Edge Guide, Turn Bar. STD Unwind w/ Roll Loader. Can Be Seen In Operation

SOLD
Mark Andy 2200 13" 8 Color Item #1569

13" Mark Andy 2200: 8 Print Stations, 13" Web Width, Roll Lift, Video Inspection, Turn Bar, Single UV on Final Station, 1/8CP Gearing, Score Slitting, 2 Die Stations + 1 Sheeting,

SOLD
Mark Andy 2200 10" / 8C Item #1560

2007 Mark Andy 2200, 10" Web Width, 8 Colors, 1/8 AND 32DP Gearing, UV on Final Station, Score Slitting, Edge Guide, Video Inspection System PWR REQ: 208V, 3 PH, 60Htz

SOLD
Comco Proglide 22" 11 Color Item #1531

Comco Proglide  MSP, 22" - 1998, 11 Colors. Auto Register, Splice on the fly automated unwinds and rewind, New Chiller in 2008, 1 UV on Final Station, 2008 Corona Treater, Raise Chill Drums, Natural Gas hot air Drying Sta. #1 - #10, Press Speed 750 FPM, Enclosed Dr. Blades, comes with 22 Anilox rolls, Print […]

SOLD
Xeikon 3030, 7.9" to 13" Digital Press Item #1312

Xeikon 3030, 7.9" to 13" Width, Up to 180 ft Repeat Length, LED Drying, 5 Color, 1.6 mil - 21.65 mil Stock Caliper. It is still available, it is 5 colors.  Currently has Orange as the fifth color so all that is needed is a good cleaning and install white toner.

SOLD
Mark Andy 2200 10" 10 Color Press Item #1541
[embed]https://www.youtube.com/watch?v=EHy0yYywCNM&t=10s[/embed]
SOLD
Arpeco Tracker 16" Item #1491

Arpeco Tracker: 16" with Roll Lift, Waste Rewind, 1" and 3" Rewind Cores, Edge Guide, Shear Cut Slitting

SOLD
13" Rotoflex DLI Item #1509 SOLD

2004 Rotoflex DLI VeriCut, 13" Web Width, both Semi-Rotary and Full-Rotary Die Cutting,  Laminating, Slitting, Single Product and Waste Rewinds,  Stacker/Conveyor,  UV System included but not installed.  In good condition.  Power Req: 460V, 60 Amps, 3 Phase

SOLD
PCMC Avanti Central Impression Flexo Press Item #1477

Video #2 Video # 3 https://youtu.be/s2a2n1d7IL8 PCMC Avanti Central Impression Flexographic Printing Press - Capable of printing Tissue to Board Stock, 8 Colors, 50" Web Width, Mint Condition Only Used for Testing,  Repeats 14"- 18"- 20" - 22" - 23.5", Tint Sleeve 38", Plate Sleeve Mandrel BCD 4.140", Print Speed up to 1000 fpm, Central Impression […]

SOLD
Nilpeter MO 3300 Servo Press Item #1527 OFF THE MARKET

Nilpeter Model M03300, Year 2006 13” Offset/Flexo press/ Hot Stamp/ Rotary Screen/Gravure, Single unwind module 29.5“max diameter, Ten print station modules, Two Die station modules, Two Die cassettes, One gap-master Kocher & Beck die cassette, One 23” mag die, One 24” mag die, One 25” mag die, Single shaft rewind module 29.5” max diameter with […]

SOLD
Mark Andy 2200 13" 8 Color Listing #1503

Mark Andy 2200 - 13" 8 Color Flexo Press - UV & Water Base with 1/8" Gearing, 1 Sheeting Station, 2 Die Stations coming with Print Cylinders and Anilox

SOLD
Mark Andy 2100, 7", 4 Color Item #1470

Mark Andy 2100, 7" Web Width, 4 Colors, 3 Die Stations, 1 Sheeting Station, Laminator, 2 Product Rewinds, 1 Waste Rewind. (Roll Lift NOT Included)

SOLD
Aquaflex Instaprep, 6 Color, 10" Item #1468 SOLD

Aquaflex Instaprep - 6 Color, 360 Register, IR & Dr. Honle UV Drying, De-Lam/Re-Lam System, Quick Change Die Stations, Dr. Blades, Stacker. Under Side Laminator, Unwind/Rewind Units on a Rails system above the Press, 2 Quick Chance Carts for either Die Stations or Print Stations, Includes Approx. 90 to 100 Print Cylinders, and 9 Anilox […]

SOLD
Rotoflex 13" DLI-330 Item #1294

Rotoflex DLI-330, 13" Web Width, 2004 Model Year, Flood Coating Station, Secondary Spot Coating Station with Re-Reg, 1 Die Station, Laminating Station,

SOLD
Comco Cadet 9 Color 7" Press Item #1348

1990's Model Year Comco Cadet, 9 Colors, 7" Web Width, 2 Die Stations, 2 Waste Rewinds, 2 Product Rewinds, UV on Final Station, Laminator w/ Silencer, Edge Guide, Turn Bar, 9 Anilox Rolls and Small Amount of Cylinders will come with this Press. (No List Available)

SOLD
Aztech Roll Runner Battery Operated Lift Item #1466

Aztech Roll-Runner Battery Operated Lift, Includes Charger, Fits 3" Cores, 400lbs Max Lift Weight, 30"x 10" Max Roll Size

SOLD
Mark Andy Stacker 13" #1598

Mark Andy 13" Stacker. Includes Pin and Connection Cables.

SOLD
Mark Andy 16" Stacker Item #1523

4120 Mark Andy 16" Stacker

SOLD
Mamata Vega Pouch 265 PM Item #1490

Mamanta Pouch Machine for 3 Side Seal and Zipper Pouch, as well as Stand Up Pouches. AC Servo Motor & Drive  Processing Specifications  Polymer processing Capability  Laminates of PET / BOPP / Alu. Foil, etc.  Off-Wind  PMDC + Thy. Drive  Film Index / Film Draw  AC Servo Motor + Drive  Main Drive  AC Frequency Variable […]

SOLD
Sonic Solutions Cleaner #1585

Sonic Solutions Cleaner: 20.5" Length, 13" Wide, 7" Deep PWR: 117V, 60Hz, 1010W, 8.60A

SOLD
Propheteer 1000 Print Stations and Die Stations Item #1518 SOLD

Propheteer 1000, 1993, 230 V, 110 Amps, 8- P.S.I. Air, Web Width 10”, 5 colors, 2 Die Stations, Single Waste Rewind, Manuals included  

SOLD
Mark Andy 2100 6 Color Item #1492

Mark Andy 2100, 6 Colors, 7" Web Width, 2 Die Stations, 1 Sheeting Station, 2 Waste Rewinds, 1 Product Rewind. Press will come with Stacker, Turn-Bar, approx. 180 Print Cylinders, and 11 Anilox Rolls. NEW Impression and Drive Gears, Updated Edge Guide

SOLD
Mark Andy 4120 16" Item #1524 SOLD

Mark Andy 4120, 3 Colors, 3 Die Stations, Turn Bar, Up Graded In Feed Tension System (Montalvo) 16" Stacker Also Avail for Purchase

SOLD
ABG Omega RTS330 Sheeter Item #1587

Omega RTS330 Sheeter by A B Graphics Intl. Maximum Web Width:330mm (13") Maximum Speed: 10000 sheets/hour Maximum Unwind Roll Diameter: 700mm (27.5") Standard Core Diameter: 76mm (3") Minimum/Maximum Sheet Length: 25mm (1")/ 1000mm (39 ⅜") Power Req: 240V, 1PH, 10 Amp Air Req: 80 psi

SOLD
13" Telstar Cold Foil Unit Item #1119
SOLD
Copy of SOLD Comco ProGlide Item #1009

SOLD Comco ProGlide 13" Martin butt splice unwind, 8 ProGlide printing stations with hot air drying, Automatic register, One final UV, Sheeting/Diecutting station, Four foot conveyor.

SOLD
SOLD Rotoflex VSI 330 Item #1170
SOLD
Allied Gear F II Item #1362 SOLD

Allied Gear F II, 4 Colors, 10" Web Width, 1988 Model Year, 2+1 Die and Sheeting Stations, 2 Product Rewinds, Turn Bar, Roll Loader, B-Bunch Fan Folder, Print Cylinders

SOLD
ASHE Slitter Servo Item #1069 Off the market

ASHE Slitter, Model 41-41, 2011 Model Year, Servo Gearing, 16" Width, 2 Product Rewinds, 1 Waste. Edge Guide, and Slitting Features.

SOLD
Mark Andy SLR Digital Printer Item #1071

 Mark Andy SRL, roll-fed, full color (CMYK) Toner-Based Digital Printer that Fits 8.5 inch to 12.6 inch Web Widths and can Print on a Variety of Qualified Materials with no Pre-Coated Substrate Requirements. It Delivers High Quality 600 x 1200 dpi Images With Variable Data and High Definition Output and Comes Equipped with Server and Software […]

SOLD
ABG Omega 40" Unwind w/ Slitting Item #1163

ABG Omega 40" Unwind w/ Slitting attachment, 2006 Model Year, 13" Width. Power: 240/208 Voltz

SOLD
Telstar Rotary Screen Unit Item #1149

Telstar Engineering, 2006, 13" Rotary Screen Unit, Servo Driven, 12" to 18.250" Repeat  

SOLD
Webtron 650/750 Double Waste / Lam Tower Item #1152

Double Waste Rewind and Lam Tower. Both Will Fit on a Webtron 650 or 750.

SOLD
Kamman Item #1171

Kamman - 14", 5 Screen / 1 Flexo , 4 Die Stations, 1994 Model Year, 1/8" Gearing, One Product Rewind. 1 Waste Rewind, Light Touch UV's, Knife and Crush Slitting, Laminating Tower, Edge Guide, Turn Bar. Also Includes Corona Treater, Hot Stamp Unit, and MANY Extra Parts.

SOLD
JM Heaford Cobra 1000 Item #1185

JM Heaford- Cobra 1000 D, 40" Width, 2010 Model Year, In Very Good Condition Power Specs: 120Vac, 20Hz, 5 Amp, Single Phase

SOLD
Omega Unwind w/ Slitting Item #1193

wind 40” diameter, 3” diameter air mandrel, automatic adjustable pneumatic brake, integrated reel lift, electronic web guidance with adjustable splice table and pneumatic web clamps. Auto lift scissor slitting unit with nip drive incl. Includes 2shaftswith 7 sets rotary knives and removable knife shafts. Servo motor and control package. 

SOLD
Xeric Web UV Item #1194

Xeric Web UV System, 2007 Model Year, 20" Width. In Very Good Condition

SOLD
Pro511 DW Digital Web Press Item #1200

Okidata ProColor511 Digital Web Press, 12.9" Web Width, Year 2012, Excellent Condition. 

SOLD
Polar (2006) 137XT High Speed Paper Cutter Item #1204

Polar 137XT High Speed Guillotine Paper Cutter (2006), with Advanced Micro Processor Controls, Stacklift LW1000-6, RA-6 Automatic Jogger with Integrated Counting Scale and Accessory Air Conveyor Tables.

SOLD
Flexo Wash Roll Cleaner Item #1210

Flexo Wash Roll Cleaner Model 993, 1998 Model Year, 20" Width. In Good Condition

SOLD
Power Forward Inserter Item #1212

Power Forward Inserter,Max 10” (250mm) width of printed booklet(s), Cross Web and Booklets to be laminated to base web, ft/min (26 to 38m/min), Speed consistent with your web, 85 to 125 and Accuracy +/- 0.02” (0.5mm), +/- 0.01” (0.25mm), Cross web and Dual tracking of your web speed to support accuracy; encoder & I-MARK sensors included and Product-to-web alignment ensured by integrating pinch roller (laminating point) into PowerBooklet […]

SOLD
CTC 7" Turret Rewinder Item #1282

Model:  ST 300RW-5-8, Age 1995, 9.5” wide with 7” Cores, Core Glue, 5 Spindle, 1” Spindles with 8" Dia. Max, Clutch Driven,

SOLD
Mark Andy 4200 Item #1286

Mark Andy 4200, 10" Web Width, 3 Colors, 5 Die Stations, 2 Product Rewinds, 2 Waste Rewinds, 5 Removable Base Rolls, Lam Tower, Edge Guide, Turn Bar, Constant Turn Anilox. UV System not included.

SOLD
Webtron 1000 8 Color Press Item #1384

Webtron 1000, 8 Colors, 3 UV's, 3 Die Stations, 1 Sheeting Station, Slitting, Lam Tower, 1 Product and 1 Waste Rewinds. Will come with APROX 300 Print Cylinders. (No List Available) 

SOLD
2013 Mark Andy P3 17" Item #1437 SOLD

Mark Andy P3 (17 inch) (2013), 40” Unwind, Roll Lift, Ultrasonic Edge Guide wit 2 sensors, 8 Colors, Standard Dr. Blades, Hot Air Drying, 2 die Stations, 1 Sheeting Station, 1 Waste Rewind, Lateral Web shift, Waste Rider Roll, BST Inspection System, 2 Product Rewinds 40”, Rail System from Station #1 to #4

SOLD
Newfoil 5500 Hot Foil Die Cutter Item # 1438 SOLD

Newfoil 5500 Hot Foil Die Cutter, 1999 Model Year, 2 Foiling Stations with 2 Colors Each for a Total of 4-Color Foil Printing, 1 Die Cutting Station, 10” Max web width, 9” x 9” Max Foil Printing and Die Cutting Width, 1 Product Unwind with 20” Max Unwind OD, Re-Register Control at Infeed, 2 Product […]

SOLD
Nilpeter FA3300 Item #1511 SOLD

Nilpeter FA3300, 8 Print Stations, 13" Web Width, 2001 Model Year, 3 Die Stations, UV Drying on 2 Stations, Lamination Tower, Edge Guide, Turn-Bar, Slitting, 1/8 Gearing. Tek-Nek Web Cleaner, Coro-Tech Corona Treater. !00% Inspection System not included with the sale.

SOLD
16" CTC Turret Rewinder Item #1538 SOLD

16" CTC Turret Rewinder with Core and Tail Glue 220V

SOLD
Mark Andy Scout Item #1463 SOLD

Mark Andy Scout 6 Color UV on Final Print Station, 2 Die Stations, 1 Sheeting Station, Laminator, 2 Product Rewinds, 2 Waste Rewinds, Edge Guide. 1 Dryer Box,  5 Plate roll Adapters for 7" Mark Andy 830. 1 Die Adapter for 7" Mark Andy Tooling (3 stations) Exit Pacing, Will come several yellow jacket cutting dies, […]

SOLD
Web Techniques WT-25 Item #1547 Sale Pending

Web Techniques WT-25: 7" Stock Width, Slow and Stop Presets, Length Count. In Good Condition.  Includes 3/4", 1", 1 1/2", 1 5/8", and 3" Rewind Cores VIDEO   https://youtu.be/YDGDGSf1fP4     

SOLD
Nilpeter FB 3300 Ink Pans Item #1575

Nilpeter FB 3300 13" Ink Pans - Includes Multiple Paper Liners. 7 Available

SOLD
Aztech 13" Rewinder Item #1409 SOLD

Aztech 13",  2005, BSR2X-4013, 40" Unwind, Dual Rewind, 3" Cores, 208/230V, 3HP Motor, Single Phase, 50/60HZ

SOLD
SOLD CX1200 / RapidX Digital Printer Item #1062

SOLD CX1200 Color Label Press with RapidX Roll to Roll Printer Combo. Both in Good Condition

SOLD
Kopack Rotary Letterpress Item #1077 SOLD

Kopack Rotary Letterpress Model 250- 12 Colors with 12 Kopack/Eye Cure Light UV's, 10" Web Width, 1/8" Gearing, Slitting, 2 Die Stations & 1 Sheeting Station, Stacker, Laminating Tower, Edge Guide, 2 Product, 1 Waste, 2 Removable Base Rolls, Max. Rewind Dia. 16", Max. Unwind Dia. 31.5". Press Comes With An Extra Central Impression Drum […]

SOLD
SOLD Mark Andy 2200 Anilox Rolls Item #1100 SOLD

Mark Andy 2200 Anilox Rolls, 7", All in Great Condition. 25 total

SOLD
SOLDComco Commander 18" Press Item #1138

Comco Commander 18", 9 Colors, Model Year 1984, 1/8 Gearing, 1 Product Rewind, Gas Fired Dryers, 40" Unwind. Some Print Cylinders Included (No List Available)  

SOLD
Gallus Arsoma EM410 Item #1153 SOLD

Gallus Arsoma EM410 - This press has a Martin Automatic Butt Splicer at the Unwind and a Sherman Corona Treater. Press also has back rail for auxilary equipment. Power/ Press: 400V, 3PH, 80A ,50/60 Hz; UV Lamps: 415V, 3PH , 263A, 50Hz Transformer also available for an additional cost.

SOLD
Aquaflex DMX Press Item #1198 SOLD

Aquaflex 1008, 2006,10", 8-Color, 2 Web Guides, 1 At Unwind & Before Die Station, Roll Lift at Unwind, 2 Waste Wind-Ups, 1 Laminations Tower, 3 Die Stations, Air, Heat & IR Dryers, Turn Over Bar, Extra Long Conveyor for Sheeter Station, Pro Mark Web Inspection System, 1 – UV Station #8 Fixed   Tooling: 69 Print Cyl From 65 to 130 Tooth, 23 Anilox.  

SOLD
Webtron 750 Item #1202 SOLD

Webtron 750 - 6 Color on a 7 Color Frame, 1/8 Gearing, Dr. Blades, Quick Change Anilox, Turn Bar, Single Product Rewind, Single Waste Rewinds, 3 Die Stations, 1 Sheeting Station, Approx 135 Print Cylinders will be Included with this Press. (List Available)

SOLD
Web Techniques Rewind Table Item #1215 SOLD

WT-15 7" Rewind Table, Mechanical Cores, Individual Label and Length Counter, Winds in or Out, Very Clean.

SOLD
Sohn 13" Rotary Die-Cutter Item #1261 SOLD

Sohn 13" Rotary Die Cutter, 13" Repeat, Mag Die, RD Scorer, Lam Tower.

SOLD
Propheteer 1000 Press 10" 4-Color Item #1264 SOLD

Propheteer 1000 10" 4 Color Flexo Press. Details: 3 Die Station + 1 Sheeting Station, Crush Cut Slitting, 1 Product and 2 Waste Rewinds, 4 Removable Base Rolls, Edge Guide, Constant Turn Anilox, Roughly 1500 Meter Hours, 

SOLD
iTech TALON 4" to 8" Digital Label Printer SOLD

iTech TALON Digital Label Printer by Allen Datagraph Systems Inc. (ADSI) is a complete, affordable digital label production solution that meets the needs of all converters and end users who have short run label requirements. Specs: Epson MicroPiezo® ink jet technology, Up to 4 feet/min | 1.2 meters/min, Extra High Capacity, Ethernet 100 Base-T or USB 2.0 Dimensions: 4 - […]

SOLD
10” PIC Slitter Rewinder Item #1275 SOLD

This Listing has been Sold. For other equipment like this, visit our Slitter/ Rewinder tab or Call (920) 569-3655   10” PIC Slitter Rewinder, (Mid 1990’s) Single Product Rewind, Edge Guide, Slitting, In Good Running Condition

SOLD
Karlville Seamer Item #1293 SOLD

Karlville K-5 Seamer, 850/1050mm Width, 2006 Model Year, Auto Unwind Supported Turret, Rewind Cantilever Turret, Adjustable Forming System, Speed: 400 m/min, Unwind Diameter: 800/1000mm, Rewind Diameter: 600mm, Min. Lay Flat Width: 55mm, Lay Flat Tolerance: 0.25mm, Core Diameter: 3" (76mm)  

SOLD
HP DesignJet 9000S for Sale Item #1311 SOLD

HP DesignJet 9000S Plotter Printer, Model: Q6665A, 54" Web Width, Includes Air Purifier and High Speed Dryer.

SOLD
SOLD Mark Andy 2200 17" 8 Color Press Item #1323 SOLD

Mark Andy 2200, 17", 8 Colors, 2014 Model Year, Turn Bar, Relam - Delam, Corotec Corona Treater, 2  Die Stations, 1 Sheeting Station, 2 Product Rewinds / 2 Waste Rewinds,  Full G.E.W. UV and Hot Air, Laminating Tower, Die Hoist, This Press is in Excellent Condition.

SOLD
SOLD Epson SurePress Digital Printer (2010) Item #1336

This Item has SOLD. Please Call or Email for More Equipment Like This  Epson Micro Piezo™ inkjet technology, RESOLUTION: 720 x 720 dpi, 720 x 1080 dpi, 720 x 1440 dpi (for paper), 720 x 1440 dpi (for film) INK TYPE: Water-based pigment ink system INK CARTRIDGES: Matte Black, Black, Cyan, Magenta, Yellow, Green, Orange Web […]

SOLD
Rotoflex 10" VSI 250 Item#1341 SOLD

Rotoflex VSI 250, 1997 Model Year, 10" Width, Edge Guide, Crush Cut Slitting, In Very Good Condition. 

SOLD
Colordyne 1600-PC High Speed Printer and Laser Die Cutter Item #1346 SOLD

Colordyne (2013)1600-PC Laser Series Production Class High Speed In-Line InkJet Print System with Laser Die Cutting System by AzTech Colordyne PC Chassis Engine, 5 Blade Unit, 1600 x 1200 dpi, CDT – Job Control Software with PC, Flatbed Scanner with Color Calibration 160 Feet/Minute Max. Printing Speed, Dual-Servo Driven Web Control for Critically Precision Web […]

SOLD
Aquaflex Instaflex 13" Press Item # SOLD

SOLD  Aquaflex Instaflex, 13" Web Width, 7 Colors, 1997 Model Year, 1 Die Stations + 1 Sheeting Station, 1 Product, 1 Waste, Single Aetek UV, Crush Cut Slitting, Turn Bar, Lam Tower, Edge Guide, Doctor Blade Assemblies, Strobe Light, Under Scorer, Web Cleaner, Video Inspection System. 

SOLD
KTI Turret MR 1624-05 16" Item #1381 SOLD

KTI Turret MR 1624-05, 16", 3 Spindle, Max 24" OD Rolls.  

SOLD
10" Mark Andy Turn Bar Item #1382 SOLD

10" Mark 4120 Andy Turn Bar 

SOLD
Comco Cadet 7" 4 Color Press Item #1398 SOLD

Comco Cadet 7",  4 Color,  Constant Turn Anilox, 2 Die Stations, Sheeting Station, Conveyor, 2 Product 2 Waste Rewind, Lam. Tower, Magpower Tension Control unwind, 4 IR Dryers, Good condition, Can See In Operation. (4) 400 line Anilox Rolls (4) 700 line Anilox Rolls (16) print Cylinders

SOLD
Franklin Hot Stamp Item #1402 SOLD

Franklin Hot Stamp Press - Model 164-268 Gen II, 2 Color, 8" Width, 1 Die Station, 1 Product, 1 Waste, Sheeting Station, Stacker, Edge Guide, 2 Foil Stations. Available Immediately.

SOLD
Mark Andy 830 7" Item #1393 SOLD

Mark Andy 830 7" - 3 Color, 1/8 Gearing, 2 Product, 1 Waste, 2 Die Station and 1 Sheeting Station, Laminating. Good Condition. Available Immediately. Comes with a transformer to be able to run on 230V or 120V. Coming with 50-60 Assorted 7" Dies  (No List Avail)

SOLD
Aztech 10" Rewinder Item #1408 SOLD

Aztech 10", 2006, BSR2X-4010, 40" Unwind, Dual Rewinds, 3" Cores, 208/230V, 2 HP Motor, 3 PH, 50/60HZ

SOLD
Corotec 20" Corona Treater Item #1406 SOLD

Corotec 20", 2014, Single Side Treater, 2KW, Rated at 750 FPM, Ozone Filter and Blower Included. Will Treat Film and Foil.

SOLD
SOLD Mark Andy XP 5000 13" Item #1417 SOLD

(Item has been sold)   Mark Andy XP 5000, 2007, 13”, 8 Colors with UV Systems & Hot Air Drying, Turn Bar, Delam/Relam Unit, Lamination Tower, 2 Die Stations, 1 Slitting Station, 2 Product Rewinds, 2 Waste Rewinds, Martin Butt Splicer, Martin Turret Rewind.

SOLD
Delta ModTech 10'' Die Cutter Item #1419 SOLD

Delta ModTech Delta Crusader, (2002) Model CRU/G&L-10, 10”, with 6 Spindles (3 Upper and 3 Lower) Six Heads, 3 Web Guiding Positions, Up Graded Software, 2 Back Up Drives, 120 VAC

SOLD
Mark Andy PM 160 Plate Mounter Item #1421 SOLD

Mark Andy PM 160 Plate Mounter with Microscope - Plate Roll Length 6 1/2" min. to 16" max, Repeat 4" min. to 24" Max., Repeat 4" min. to 24" Max., Air Supply 50 psi nominal 0.5 cfm, 120 VAC, 5 amp

SOLD
Mark Andy 4120 16" 3 Color SOLD

Mark Andy 4120 - 16" with 3 Colors, 3 Die Stations, 1 Perf Station and 1 Sheeting Station, 2 Product, 1 Waste, 1/8 Gearing. Comes with a Roll Lift, Turn Bar, Dr. Blades, Ceramic Aniliox, Crush Cut Slitting, Web Guide, Hot Air Drying. In very good condition mechanically and electrically.

SOLD
Martin LRD 26" Transfer Rewind Item #1424 SOLD

Martin LRD 26" Transfer Rewind, Model LRD 10-26-30, Automatic Transfer Rewinder, 2007 Model Year

SOLD
Arpeco Tracker 16" w/ Roll Lift Item #1425 SOLD

Arpeco Tracker, 1995 Model Year, 16" Width, Roll Lift, Strobe Light, Shear Cut Slitting. 

SOLD
Stanford Model 638 30" Item #1432 Sold

Stanford Model 638 30"   Stanford 638, 30" Web Width, 1000 fpm, Slitting, Unwind 32" dia., Dual Rewinds 26" Roll Dia., Roll Weight 700lbs

SOLD
Rotopress/Nilpeter Model FB 2500 Item #1434 SOLD

Rotopress/Nilpeter Model FB 2500, 1993, 4 Color, 10” 400 Watt DBL Lamp UV on Final Station, 3 Die Stations, 1 sheeting Station, Single Product Rewind, Laminator, Hot Air Drying, Edge Guide, Up Graded Tension System

SOLD
Mark Andy 4120 5 Color 16" #1428 SOLD

Mark Andy 4120 16" 5 Color, Roll Loader, UV On Final Print Stations, Laminating, 2 Waste Rewind, 4 Die Stations, 1 Sheeting Station, Dual Rewinds.   Turn Bar Available

SOLD
SOLD Aquaflex LX 26" 9 Color SOLD

Aquaflex LX, 9 Colors with Chill Rolls after each Print Station, 1999 Model Year, 26”, 1/8 Gearing, 10” to 24” Repeat, 42” Unwind, 42” Product Rewind, 2 Waste Rewinds 30”, 2 Die Stations 24” Repeat, 400 Watt Aetek UV in Final Station, Mid Nip system, Infeed Tension, 4 Reversible Print Stations (1,2,8,9), 3.5 KW Pillar […]

SOLD
Nilpeter FB 2500 8 Color Item #1445 SOLD

Nilpeter FB 2500: 2002 Model Year, 8 Print Stations with Helical Gear Boxes, 4 GEW UV Units Installed on Stations #2,#3,#4,#8, Video Inspection System, 3 Die Stations, 1 Sheeting Station, 2 Product Rewinds, 1 Waste Rewind, Laminator, Edge guide, Stacker, Turn Bar 40” Unwind Includes Approx. 40 Anilox Rolls and Approx. 750 Print Cylinders    

SOLD
Mark Andy 2200 7", 6 Color Press Item #1447 SOLD

Mark Andy 2200, 7”, 6 Colors, 2 Die Station, 1 Sheeting Station, Laminator, 2 Products Rewinds, 1 Waste Rewind, Turn Bar, UV on Final Station, BST Inspection System, 6 Anilox Rolls, 6 Ink Pans, Manuals. Approximately 138 Print Cylinders (No List)  

SOLD
KTI Butt Splicer Model CZ1 Item #1453 SOLD

KTI Butt Splicer:  Model CZ1, 2006 Model Year, 13" Width Upgraded Vacuum Table 

SOLD
Arpeco Tracker 13" Item #1455 SOLD

Arpeco Tracker, 13” Mid 1980’s in good condition with Roll Loader and counter

SOLD
KTI 13" Turret Rewind Item #1446 SOLD

13" KTI, 3 Spindle MR Model, 1998 Model Year, no Core or Tail Glue customer used Pre-Glue Cores or Double sided tape. 

SOLD
Mark Andy 2200 10", 8 Color Item #1449 SOLD

Mark Andy 2200 8 Color Press, 1995 Model Year, 10" Web Width, 1 UV on Final Station, 4 Die Stations, 1 Sheeting Station, Laminator 2 Product Rewinds, 2 Waste Rewind, Roll Loader, Web Cleaner, Turn Bar, Relam/Delam,    

SOLD
Allen Datagraph I Tech Axxis 8.5" Item #1458 SOLD

Allen Datagraph I Tech Axxis 8.5" Digital, Roll to Roll, Table Top Label Printer. 

SOLD
Allen Datagraph Axxis DLS Item #1459 SOLD

Allen Datagraph 8.5" Axxis DLS Roll to Roll Label Finisher

SOLD
Double E Core Cutter Item #1465 SOLD

Double E Core Cutter, Fits 3" Cores up to 60" in Length

SOLD
SOLD Allied Gear FM3 8C 10" Item #1467 SOLD

1991 Allied Gear FlexoMaster 3, 10 inch  Modified by Allied Gear to run 400 feet per minute 40 inch unwind with roll lift (this is an upgrade from the factory) Infeed pacing with splicing and Accu-Web, Web Guide 8 print stations with 4 way adjust print heads, manual lineal and lateral register adjustment Hot Air […]

SOLD
Mark Andy 2100, 7" 3 Color Item #1469 SOLD

Mark Andy 2100, 3 Colors, 3 Die Stations, 1 sheeting Station, 2 Waste rewinds, 2 Product Rewinds, Edge Guide. 1 Blank Print Station Included  

SOLD
Webtron 650, 6 Color Item #1472 SOLD

Webtron 650, 6 Colors, 3 Die Stations, 1 Sheeting Station, 2 Product Rewinds, Infeed Tension System, Turn Bar, Stacker. 

SOLD
Mark Andy 820 Item #1474 SOLD

Mark Andy 820, 3 Color, 2 Die Stations, 1 Sheeting Station 2 Wastes, 2 Product Rewinds, Bottom Stacker   Equipment included with MA 820 1-400 line 4.0 BCM ceramic anilox roller (New) 2-400 line chrome anilox rollers (New) 6-Metering rollers 6-Metal Ink Trays 2-score sets 1-pinfeed punch set 2-Nip rollers 1-Stepped up die anvil 1-Stepped […]

SOLD
Mark Andy 910 Item #1475 SOLD

Mark Andy 910, 7”  Web Width, 4 Colors,  Each Print Station Will Come Complete ( Chrome Anilox), Laminator , Waste Rewind , 1/8 Gearing , Constant Turn Anilox, Razor Slitting , Edge Guide , Approx. 45 Print Cylinders   

SOLD
SOLD Mark Andy 830 10" Item #1478

Mark Andy 830 10", 3 Color, Aztech Unwind, Laminating, Single Waste Rewind, Dual Product Rewinds, 2 Die Stations, 1 Sheeting Station.  Razor Slitting, Counter, 7300 Hours, Stacker Not Included.

SOLD
Flexo Wash 800 Item #1480 SOLD

Flexowash 2003 Model 800 Single Roll up to 18” Anilox Cleaner  

SOLD
Aztech Sidewinder 18" Item #1479 SOLD

Aztech Sidewinder - 18" Web Width, 2001 Model Year, Dual Rewind, Counter, Razor Slitting, 1", 3" , 4" and 6"  Rewind Coreholders  

SOLD
B Bunch, 5 Stream, Jumbo Ticket Folder Item #1482 SOLD

B-Bunch Jumbo Ticket Folder, 1994 Model Year, Model J317, 5 Stream. 

SOLD
Mark Andy XP5000 10 Color Item #1493 SOLD

Mark Andy XP 5000, 2010, 13” Full UV and Hot Air, 10 Colors, Auto Register,  1/8 Gearing, 3 Die Stations, 1 Sheeting Station, 2 Waste Rewinds, 1- 40” Product Rewind, Stacker, Turn Bar, Corona Treater, Web Cleaner, Expandable Bridge, Second 40” Unwind, 2 Rotary Screen Units, Cold Foil, Laminator, 20 Ink Trays.

SOLD
Thiele ST1250 Feeder Item #1495 SOLD

Used Thiele Vacuum Transport Feeder Model ST1250 120 Vac

SOLD
Multifeeder Tech. MFT550IP #1496 SOLD

Model MFT550IP Friction Feeder Multifeeder MFT550IP Typical Applications, Carton Blanks, File Folders, Report Covers, 11" x 17" Sheets, And many more!   Spec Sheet https://www.thompsondirect.us/mft550ip.html   

SOLD
B-Bunch 20" Fan Folder Item #1498 SOLD

B-Bunch 20" Fan Folder, Manufactured 2009, Model 100 Series 500, Very Good Condition. Will Include 5 Fold Gears and Press Hook-Up. Gear Sizes: 60T, 88T, 90T, 96T, 112T

SOLD
16" Arpeco Premier Item #1508 SOLD

2005 Arpeco Premier, 16" Web Width with Shear Cut Slitting. Portable Roll Loader Will Be Included

SOLD
SOLD- DuPont Cyrel 1000P Solvent Plate Processor Item #1521

The washing system serves to automatically wash flexographic printing plates of all types   Power: 3 ~ 208V / PE / 50Hz / 60Hz Fuse 25 Amps

SOLD
Webtron 650 Item #1525 SOLD

Webtron 650, 5 Colors, 32 DP Gearing, 3 Die Stations, 1 Sheeting Station, Single Product and Single Waste Rewinds, UV On Final Station, In Good Condition. 

SOLD
Allied Gear 300, 10" Item #1534 SOLD

Allied Gear 300 Series : 1999, 4 Color 10” Press, 3 Die Stations, 1 Sheeting Station, 2 Waste Rewinds, 2 Product Rewinds, Laminator (Turn Bar NOT included) 

SOLD
Roll Runner MH 80A Item #1549 SOLD

Aztech Roll Runner MH-80A - Material Handling Cart, Roll Loader 800lbs Max Weight, 63" Lift

SOLD
Web Techniques Rewind Table WT-15 Item #1553 SOLD

Web Techniques Rewind Table WT-15PB, 3" Pneumatic Core Holders, Wind in or Out, Length Counter w/ Stop Preset

SOLD
Longford Onsert OS700TM (NEW) Item #1567 SOLD

Longford OS700TM, Product size 9W X 8L X .125 TH. In Good Condition. 

SOLD
CUDA Parts Washer Item #1576 SOLD

CUDA Aqueous Parts Washer. Top and Side Sprayers for Both Baskets. Dual Level 

SOLD
Mark Andy PM160 Item #1578 Sold

Mark Andy PM160 Optical Plate Mounter. PWR: 120V, 10amp, 80 psi

Sign Up For Our Newsletter 

Join to receive new inventory & gb Flexo News!
@2019 gb Flexo. All Rights Reserved. 
gb Flexo is a registered trademark, Green Bay, WI, USA.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram